Share us:
Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.
Change modes via smartphone app or press and hold the Return button ↩️ for approx. 10 seconds.
The mode is confirmed by sounding the “warning signal”. (Mode 1 is always active during installation)
Example: 1x warning signal = mode 1, 4x warning signal = mode 4
Repeat the process to switch from mode to mode.
Mode 1
The mileage counter is stopped 100%
Mode 2
10% of the driven mileage are counted and 1/10 of the actual speed is shown on the speedometer.
Mode 3
The mileage is halved (50%) and the speedometer also shows 50% of the actual speed.
Mode 4
The mileage counter is stopped 100%
Mode 5
Odometer counts 100% of the mileage
If the speed in your vehicle does not work properly, a calibration is necessary.
To start the calibration press the return key 10 times when the module is on. Ideal for calibration is a speed of 60KM/h or 60MP/h.
After that you can adjust the speed with the arrow up and down keys. (Please press the buttons in larger intervals & observe whether the speed changes during the ride on the speedometer).
If the speed is set correctly, please press the OK button until an acknowledgement appears (speedometer needle drops to 0KM/h or the vehicle beeps 1x briefly).
Finally, press the Return key 12 times to exit the calibration mode.
Mercedes B-Class, W242/W246, Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.
The device can be activated or deactivated, either while in motion or when stationary.
It is recommended that you purchase the Openport 2.0 together with a Mercedes Kilometer Filter. After the purchase, you should contact our support team to finalize the installation. The support team will provide the login token for the MB Tools software free of charge (the offer is only valid for those who have already bought the Openport 2.0 in our shop). You can use it to make one of the following adjustments:
Speedometer programming:
customize your speedometer, reset it (Virginize) and activate the AMG menu (only possible with certain speedometers).
Carplay activation:
Activate Carplay with just a few clicks (only possible with suitable hardware).
Software updates:
Keep your vehicle up to date by carrying out software updates directly via MB Tools.
Add it to your shopping cart now and benefit from the advantages of this combined solution for your vehicle. Please note that we can only guarantee flawless functionality with the Openport purchased in our shop. We have devoted a lot of time to the research and development of this product to ensure it will work without any issues. Hence, we can guarantee the unblemished performance of our Openport 2.0 device even though those from other providers often have a lot of issues.
To view the programming options for your vehicle, please visit the MB Tools website and search for your car.
Here is the link to the Openport 2.0 device.
The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.
| Weight | 100 g |
|---|---|
| Maximum speed of the speedometer | 260 KM/h – 160 MP/h 1, 320 KM/h – 200 MP/h 1 |
| App compatibility | With App, Without App |
| Make | Model | Year |
|---|---|---|
| Mercedes | B Class W242 / W246 | 2011 - 2018 |
Here you will find all the details about our company
Here you will find shipping and return related information
Here you will find information on all technical questions
Here you will find helpful information about installation
Reviews
There are no reviews yet.