Now Available From Our UK Distribution Centre With Full Telephone Tech Support!
LUFI XF
REVOLUTION
Code: TT104
  • Menu language: English
  • 57 Information available
  • Plug and play – just plug in the OBD socket and get started
  • Crystal clear LCD display
  • Reading and deleting error codes
Plus shipping
In the shopping cart you will have the option to calculate the exact shipping cost based on the provided information

Delivery (1-3 business days)
SKU: TT104 Categories: ,

ATTENTION

Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.

LUFI XF REVOLUTION

This is what makes tuning fun: Install new car parts, program them, check the stored data in control units, and monitor the vehicle values in real-time with the LUFI XF Revolution.

Supports warning functions such as water temperature warning, over-speed alarm, shifting reminding, and vehicle malfunction warning for safe and secure driving. You can also check for error codes and delete them if necessary.

It is meant for petrol vehicles with standard OBD-II protocol, especially for those without a water gauge, speedometer, and/or fuel consumption meter.

 

INCLUDED:

  • Lufi XF Device
  • Dashboard Fixture
  • OBD Cable
  • 128MB Memory Card
  • USB Adapter for micro-USB

Installation Videos

INSTALLATION

  1. Find the car’s OBD data interface, the common interface is usually located under the
    driver’s side dashboard.
  2. Start the vehicle and keep the engine running.
  3. Connect the vehicle OBD interface to the meter with the OBD cable.
  4. The product displays the boot animation, recognizes the protocol, and then the meter
    starts to display normally.
  5. Fixed the product and hides the trace and the installation is completed.

THE FOLLOWING INFORMATION CAN BE DISPLAYED VIA THE LUFI XF SPEEDOMETER:

– IN-MF P. = Intake pressure
– TURBO A = Turbo A
– TURBO B = Turbo B
– SPEED AVG = Average speed
– SPEED = Current speed
– TACHO / RPM = Engine speed
– OIL P. = Engine oil pressure
– FUEL P. = Engine fuel pressure

– Oil T. = Engine oil temperature
– WATER T = Water temperature (coolant temperature)
– WATER T.A = Water temperature (coolant temperature A)
– WATER T.B = Water temperature (coolant temperature B)
– EXT T. = Exhaust gas temperature
– VOLT = Battery voltage
– CLOCK = Clock

– RUN T = Runtime after engine start
– AIR F. = Airflow (airflow sensor)
– F.R.P. = Rail pressure
– F.R.P.A = Oil rail pressure A
– F.R.P.B = Rail pressure B
– THRO P. = Throttle position

– ACC P.B = Throttle position B
– ACC P.C = Throttle position C
– ACC P.D = Throttle position D
– ACC P.E = Throttle position E
– ACC P.F = Throttle position F
– FUEL T.A = Fuel temperature A
– FUEL T.B = Fuel temperature B
– CVTF T. = Transmission oil temperature
– AIR / FUEL = Air-fuel ratio

– IAT = Intake air temperature
– IAT.B1S1 = Intake air temperature (cylinder unit 1, sensor 1)
– IAT.B1S2 = Intake air temperature (cylinder unit 1, sensor 2)
– IAT.B2S1 = Intake air temperature (cylinder unit 2, sensor 1)
– IAT.B2S2 = Intake air temperature (cylinder unit 2, sensor 2)

– E.G.R. = Exhaust gas correction instruction
– ENGINE L. = Engine load value
– SHORT T. = Short-term fuel correction (cylinder group 1)
– LONG T. = Long-term fuel correction (cylinder group 2)
– 02 B1S1 = Oxygen sensor voltage (cylinder unit 1, sensor 1)
– 02 B1S2 = Oxygen sensor voltage (cylinder unit 1, sensor 2)
– 02 B1S3 = Oxygen sensor voltage (cylinder unit 1, sensor 3)

– IGN.T. = Feed angle (ignition)
– Fuel LEV. = Fuel gauge
– BARO = Air pressure
– ACC P.P = Accelerator pedal position
– CAT.B1S1 = Charge air temperature (cylinder group 1, sensor 1)
– CAT.B1S1 = Charge air temperature (cylinder group 1, sensor 2)
– CAT.B1S1 = Charge air temperature (cylinder group 2, sensor 1)
– CAT.B1S1 = Charge air temperature (cylinder group 2, sensor 2)

– FUEL C. = Current fuel consumption
– FUEL C.AVG = Average fuel consumption
– OUT T. = Outside temperature
– ACC. = Acceleration (m / s)
– GEAR = Gear indicator
– ODO = Total mileage
– TRIP = Subtotal kilometer

SPECIFICATIONS

  • Operating voltage: 10-18V DC
  • Operating current: less than 80mA
  • Sleep current: less than 15mA
  • Operating temperature: -20 – 75C
  • Dimensions: 60mm X 50mm X 67mm

Additional information

Weight 100 g
Dimensions 11.5 × 9.5 × 9.5 mm

Reviews

There are no reviews yet.

Be the first to review “LUFI XF REVOLUTION”

Your email address will not be published. Required fields are marked *

Service center
CUSTOMER CENTER

Here you will find all the details about our company

Shipping and return

Here you will find shipping and return related information

Technical Support

Here you will find information on all technical questions

Installation Support

Here you will find helpful information about installation

Call
Whatsapp
Telegram
Messenger
Support