Before ordering, please read carefully about the module activation and important notes on error messages and functions below.

FOR MODELS THAT WERE RELEASED SINCE 2016

Do-it-yourself installation
Untraceable performance
Premium-quality plugs and heat-resistant cables
Speedometer and assistance programs work flawlessly
The ability to purchase with or without an app

Cable length

Mileage Blocker with long cables are suitable for vehicles that require complicated installation process. The long end piece can be easily hidden behind a panel. If you want to remove the device for any reason, you can replace the Mileage Blocker with a blind plug and you will not have to completely dismantle the dashboard every time.

Long cable
Short cable

App compatibility

With this feature, you can connect your module directly to our SKF Speed App on your smartphone. This will allow you in the future to control your module easily and safely with your smartphone without complicated key combinations. When required, the module can be deactivated without having to remove it. The SKF Speed App has helpful features and provides useful information. It is the world's first smartphone app to control a Mileage Blocker.

With App
Without App

Clear

SKU: N/A Category: Volkswagen

ATTENTION

Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.

An important additional product

The mileage in Volkswagen’s virtual cockpit may differ from the gearbox. Diagnostic testers can easily read the real data.

To synchronise the data, you need a Can Emulator. The Volkswagen Can Emulator for Gearbox displays the same mileage on the speedometer and OBD scanners. Click on the following Product link

Gearbox OBD Emulator for VW

MILEAGE BLOCKER FOR VOLKSWAGEN ATLAS

VOLKSWAGEN ATLAS Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL VOLKSWAGEN ATLAS MODELS THAT WERE RELEASED SINCE 2016

Installation Videos

SPECIFICATIONS

Do-it-yourself (DIY) installation
Doesn’t leave a trace, no soldering or cutting of cables required
Has multiple modes
Mating face and Ridges on the connector guarantee a smooth installation process
Comes with premium-quality plugs and heat-resistant cables
No need to open ECUs

Easy to operate with several key combinations
After removing the module, the mileage doesn’t increase spontaneously
The diagnostic testers cannot discover the mileage altered by Volkswagen Atlas Mileage Stopper
Select settings once and they will be saved unconditionally
Speedometer and all the other assistance systems work flawlessly
No error messages displayed on the speedometer or navigation panel
As soon as this device is activated, the engine control light may appear on vehicles from the end of 2020

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

ACTIVATION & DEACTIVATION

Change modes via smartphone app or press the OK button for 10 seconds

Repeat the process to switch from mode to mode

Our Mileage blocker can also be used for vehicles without a multifunctional steering wheel
MODE SELECTION WITHOUT MULTI-WHEEL – Press the wiper lever down 3 times (switch from mode to mode with the windscreen wiper lever)

Mode 1
The kilometers are stopped at 100%

In this mode, when you exceed 40 km/h, the speedometer will not work anymore. To use this option, you have to activate Mode 1 and park/turn off the car for 2 minutes.

Mode 2
20% of the actual mileage is recorded

The speedometer and all other assistance systems work flawlessly

Mode 3
30% of the actual mileage is recorded

The speedometer and all other assistance systems work flawlessly

Mode 4
The kilometers are counted at 100%

The module is deactivated.

Volkswagen Atlas Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

What is Volkswagen Atlas Odometer Blocker or Mileage Correction Tool?

Volkswagen Atlas Mileage Blocker/Odometer Blocker was created for stopping the mileage in a car while testing its performance. At Super Kilometer Filter you can buy the best module with genuine components. Our programmers write software specifically for each maker and model to make sure that it works without fault. The module works even-if, the digital odometer of your vehicle counts mileage in miles or kilometers (km). Install the module and use pre-determined key combinations to change from mode to mode.

Please note, we don’t sell Mileage Correction tools for Volkswagen Atlas as they are meant for fraudulent purposes and can solely remove the mileage figures from odometers. They are usually used to rewind/roll back the distance traveled. Nonetheless, modern cars have multiple data storage units and rollback tools still fail to reverse the mileage altogether.

We offer a wide variety of Mileage Stopper devices for various vehicles. The Mileage Blocker tool works perfectly on a diesel-gasoline engine as well as Plug-in Hybrid Electric Vehicles (PHEVs) and Electric cars. Installation is simple and doesn’t require in-depth knowledge of a vehicle’s maintenance. Plug it between the port of the speedometer and the instrument cluster and you can enjoy all the benefits of this unique module.

Volkswagen Atlas Mileage Blocker is an extraordinary device, that allows you to test the performance of your automobile in a controlled environment.

FAQ

The Mileage Blocker unconditionally removes the mileage. The mileage figures will remain unchanged even after removing the module from the car. You can use our Mileage Blocker to alter the mileage and remove it anytime. Stopped mileage will not increase spontaneously after removing the module. However, in most cases, error messages should be deleted after removing the tool. Can Communications save any interruption messages as error messages. These are sporadic errors that do not necessarily have to be deleted, but it is recommended.

As soon as this device is active and the odometer is stopped or partially halted, the engine control light may light up for vehicles from the end of 2020. As soon as this device is switched off, the engine control lamp goes out again after a few vehicle movements. While we stop or partially halt the odometer, we are manipulating some messages. As these messages are not transmitted, the “Check Engine” sign may appear. This is a sporadic error and it doesn’t portray any real problem either in the engine or in the transmission. This error can also be deleted at any time with a universal diagnostic device.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Bug fixed

The check engine light will no longer light up due to our device.

On many vehicles from the end of 2020, the check engine light would go on and off after a certain amount of time, this process would then repeat itself at regular intervals. This is now fixed.