Before ordering, please read carefully about the module activation and important notes on error messages and functions below.

THIS DEVICE IS SUITABLE FOR ALL BMW 6ER F12/F13 MODELS THAT WERE RELEASED BETWEEN 2011 - 2018

Speed indicator and Assistance programs work (only in certain modes)
No error messages from Blind Spot Assist or cruise control failure.
Do-it-yourself installation
Premium-quality plugs and heat-resistant cables
The ability to purchase with or without an app

App compatibility

With this feature, you can connect your module directly to our SKF Speed App on your smartphone. This will allow you in the future to control your module easily and safely with your smartphone without complicated key combinations. When required, the module can be deactivated without having to remove it. The SKF Speed App has helpful features and provides useful information. It is the world's first smartphone app to control a Mileage Blocker.

With App
Without App

Cable length

Mileage Blocker with long cables are suitable for vehicles that require complicated installation process. The long end piece can be easily hidden behind a panel. If you want to remove the device for any reason, you can replace the Mileage Blocker with a blind plug and you will not have to completely dismantle the dashboard every time.

Long cable
Short cable

Clear

SKU: N/A Category: BMW

ATTENTION

Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.

MILEAGE BLOCKER FOR BMW 6ER F12/F13

BMW 6ER F12/F13 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL BMW 6ER F12/F13 MODELS THAT WERE RELEASED BETWEEN 2011 - 2018

Installation Videos

SPECIFICATIONS

Do-it-yourself (DIY) installation
Has multiple modes
Mileage doesn’t increase spontaneously, after detaching the module
Comes with premium-quality plugs and heat-resistant cables
Doesn’t leave a trace if you remove it: no soldering or cutting of cables required
Easy to operate with several key combinations
The diagnostic testers cannot discover the mileage altered by BMW 6er F12/F13 Mileage Stopper

No need to open ECU
Select settings once and they will be saved unconditionally
Speed indicator and assistance systems work (only in certain modes)
No error messages displayed on the speedometer or navigation panel
Mating face and Ridges on the connector guarantee a smooth installation process
If the vehicle has received a software update, you can simply activate mode two and continue using this device. No exchange or update required
Automatic Service adjustment
No error messages from Blind Spot Assist or cruise control failure
The ability to purchase with or without an app

For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

SERVICE ADJUSTMENT

Our Mileage Blocker not only stops counting covered distance in all memories of a vehicle but also automatically corrects the service. The only part which isn’t stopped while using the tool is „Service“. It is still counted down but does not record any mileage until 30% is remaining. If there remains 30% before the due date, it automatically jumps back up to 90%. If it’s pushed back up to 90% from 30%, before a message was sent, then that service reset is not recorded.

Each service is counted down from the traveled distance time. The service interval for a vehicle is structured like this. As a rule, a service must be made in every 30,000 km for diesel and 15,000 for petrol. The service is counted down while driving. If you drove 1,000 km then the next service would be in 29,000 km. If you stop mileage, then the service shouldn’t count down, but it still continues working until it reaches 30%. In the case of 30,000km, remained 30% is equal to 9,000 km.

When the kilometer stopper is active, it automatically pushes the service back up to 90%, so to 27,000km. Above mentioned numbers are not 100% correct, because many engines have different service intervals, but the percentages are correct.

ACTIVATION & DEACTIVATION

Change modes via smartphone app or press the BC button for 10 seconds

Repeat the process to switch from mode to mode

All percentages of the distance driven are approximate and not binding because they are influenced by the environment ( city/ traffic jam/ highway). And only after a longer distance of approx. 100 km / mi can you see what percentage was actually counted.

Mode 1
1. Vehicle till 2019 and without update and the live cockpit: Speed display works and the Mileage counting is stopped. 1. Vehicle: Speed = original, Counting miles approx 0-1%. Works only with models until 2019, without Update and the Live Cockpit.

2. Vehicle from 2019 or with update and the live cockpit: Counts after approx. 3 km of driving. Counts 100 % !!! 2. Vehicle: To change the mode, switch off the car. The speedometer should be off / black. (Open the door) choose right Mode for your car. The indicator: Turn light x1 flashes only inside the vehicle

Mode 2
No speed and the mileage counting is stopped for all vehicles

Speed = 3 mp/h, miles counting approx. 0-1%. Works absolutely on all vehicles. The indicator: Turn light x2 flashes only inside the vehicle

Mode 3
Speed display works and the miles count is reduced to 30%.

Interval count: stop 1 minute, count 15 seconds, repeat. 30 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x3 flashes only inside the vehicle

Mode 4
Speed display works and the miles count is reduced to 40%.

Interval count: stop 50 sec, count 20 seconds, repeat. 40 % is a guide value. The driving environment determines the count. Works independently of software updates for all vehicles until 2023. The indicator: Turn light x4 flashes only inside the vehicle

Mode 5
The kilometers are counted at 100%

The module is deactivated, the speedometer and the odometer work as usual.

BMW 6er F12/F13 Kilometer Stopper tool always maintains the last applied settings. Hence, you don’t have to change the settings before starting a car next time.

The device can be activated or deactivated, either while in motion (only for certain vehicles) or when stationary.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight	100 g
App compatibility	With App, Without App
Cable length	Long cable, Short cable

Reviews

There are no reviews yet.

Be the first to review “BMW 6ER F12/F13”

Make	Model	Year
BMW	6ER F12/F13	2011 - 2018

BMW 6ER F12/F13

£299.00 – £404.00