Now Available From Our UK Distribution Centre With Full Telephone Tech Support!
MERCEDES
GLC Class X254
Code: LB206
Before ordering, please read carefully about the module activation and important notes on error messages and functions below.
THIS DEVICE IS SUITABLE FOR ALL MERCEDES GLC CLASS X254 MODELS THAT WERE RELEASED SINCE 2022
  • Some error messages are displayed when the module is active
  • This device can only be used on one vehicle as it stores the internal chassis number!
  • Do-it-yourself installation
  • Easy to operate with the app
  • Premium-quality plugs and heat-resistant cables
Plus shipping
In the shopping cart you will have the option to calculate the exact shipping cost based on the provided information

Delivery (1-3 business days)
SKU: LB206 Category:

ATTENTION

Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.

MILEAGE BLOCKER FOR MERCEDES GLC Class X254

MERCEDES GLC Class X254 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS SUITABLE FOR ALL MERCEDES GLC CLASS X254 MODELS THAT WERE RELEASED SINCE 2022

Installation Videos

SPECIFICATIONS

  • Easy and quick do-it-yourself (DIY) installation
  • Easy to operate with several key combinations or the app
  • Lane departure warning, cruise control, automatic brake control do not work
  • You can turn it on and off while in motion
  • Doesn’t create dashes on the odometer
  • No need to cut cables or solder the components in the electronic ignition lock
  • After removing the module, the mileage doesn’t increase spontaneously
  • The average consumption is not calculated correctly, but the battery level is displayed accurately
  • Selected settings are saved unconditionally
  • Comes with premium-quality plugs and heat-resistant cables
  • Has multiple modes to choose from
  • Doesn’t leave a trace if you remove it
  • The diagnostic testers cannot discover the mileage altered by Mercedes GLC Class X254 Mileage Stopper
  • Mating face and Ridges on the connector guarantee a smooth installation process
  • The car can be charged without interference when this device is active and does not need to be deactivated
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

Attention

Some error messages are displayed when the module is active

ACTIVATION & DEACTIVATION

Activation and deactivation only possible with APP via Bluetooth

We recommend the use of MODE 2

Mode 1
The mileage is not counted. The speed is displayed correctly

All assistants do not work, only Lane Keeping Assist works. Error messages are displayed. An acoustic warning signal is permanently audible.

Mode 2
Up to 30 km/h (18mp/h) the miles are counted. From 30 km/h (18mp/h) the miles are stopped to 100%.

Up to 30 km/h (18mp/h) all assistants work. Error messages are displayed from a speed of 30 km/h (18mp/h). Only Lane Keeping Assist works. NO warning signal is heard!

Mode OFF
The module is deactivated. The kilometres / miles are counted and everything works as usual

Mercedes GLC Class X254 Kilometer Stopper tool always keeps previously applied settings, which saves your time for setting up the settings before each new ride.

The device can be activated or deactivated, either while in motion or when stationary.

SPECIAL OFFER

It is recommended that you purchase the Openport 2.0 together with a Mercedes Kilometer Filter. After the purchase, you should contact our support team to finalize the installation. The support team will provide the login token for the MBLINK software free of charge (the offer is only valid for those who have already bought the Openport 2.0 in our shop). You can use it to make one of the following adjustments:

Speedometer programming:
customize your speedometer, reset it (Virginize) and activate the AMG menu (only possible with certain speedometers).

Carplay activation:
Activate Carplay with just a few clicks (only possible with suitable hardware).

Software updates:
Keep your vehicle up to date by carrying out software updates directly via MBLINK.

Add it to your shopping cart now and benefit from the advantages of this combined solution for your vehicle. Please note that we can only guarantee flawless functionality with the Openport purchased in our shop. We have devoted a lot of time to the research and development of this product to ensure it will work without any issues. Hence, we can guarantee the unblemished performance of our Openport 2.0 device even though those from other providers often have a lot of issues.

To view the programming options for your vehicle, please visit the MB Tools website and search for your car.

Here is the link to the Openport 2.0 device.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight 100 g

Reviews

There are no reviews yet.

Be the first to review “MERCEDES GLC Class X254”

Your email address will not be published. Required fields are marked *

Make Model Year
Mercedes C Class W206 2021 - 2026
Mercedes GLC Class X254 2022 - 2026
Service center
CUSTOMER CENTER

Here you will find all the details about our company

Shipping and return

Here you will find shipping and return related information

Technical Support

Here you will find information on all technical questions

Installation Support

Here you will find helpful information about installation

Call
Whatsapp
Telegram
Messenger
Support