Now Available From Our UK Distribution Centre With Full Telephone Tech Support!
ASTON MARTIN
DBX 707
Code: LB108
Before ordering, please read carefully about the module activation and important notes on error messages and functions below.
THIS DEVICE IS COMPATIBLE WITH ALL ASTON MARTIN DBX MODELS RELEASED FROM 2022 - 2024
  • This device can only be used on one vehicle as it stores the internal chassis number!
  • 100% Untraceable – no soldering or cable cutting needed
  • Can be switched on or off while driving
  • Premium-quality plugs and heat-resistant cables
  • With Working Speedometer & Assistance Programmes
  • App control of the module is included
  • Nationwide Fitting Across The UK
Clear
SKU: LB108 Category:

ATTENTION

Please note that if the returned items are not in the original condition, or show some signs of usage, this includes removing or damaging the casing and protective sleeve, you will not be entitled to a refund. Similarly, in case of returning the products after long usage, that goes beyond the testing of the properties and functionality, you will not get the full refund.

MILEAGE BLOCKER FOR ASTON MARTIN DBX 707

ASTON MARTIN DBX 707 Mileage Blocker sometimes is mentioned as: Odometer Blocker, Odometer Stopper, Can Blocker, Mileage Stopper, Trip Odometer, Can Filter, and in some instances as a Mileage Correction tool.

THIS DEVICE IS COMPATIBLE WITH ALL ASTON MARTIN DBX MODELS
RELEASED FROM 2022 - 2024

Installation Videos

SPECIFICATIONS

  • Quick and easy DIY installation
  • Simple operation via key combinations or the smartphone app
  • Works seamlessly with speed indicators and cruise control
  • Can be activated or deactivated while driving
  • Does not affect the odometer reading
  • No need for cutting wires or soldering in the electronic ignition system
  • After removal, mileage remains unchanged and doesn’t increase unexpected
  • Saved settings are retained without exception
  • Equipped with premium-quality, heat-resistant plugs and cables
  • Offers multiple modes for flexible use
  • Leaves no trace when removed
  • Diagnostic testers cannot detect mileage adjustments made by the Aston Martin Valour Mileage Stopper
  • Connector’s mating face and ridges ensure a smooth, hassle-free installation
  • Includes app control for convenient operation of the module
For the mode that alters the mileage entirely, we allow a deviation of up to 1% of the driven distance. Provided details about stopped mileage are only approximations, and there might be such minor differences.

IMPORTANT NOTE

Important Notice: Some assistance systems may not function properly on certain vehicles. The automatic high beam assistant is not supported if the car is equipped with a multibeam; however, the high beam can be operated manually. Furthermore, it should be noted that the navigation system is no longer available on the facelift models. While the CarPlay system works but route guidance is not supported.

SPEED CALIBRATION AT ASTON MARTIN

Press the return button 5 times (confirmed by the hazard warning lights). On the left side of the steering wheel, you’ll find the handset hang-up and pick-up buttons. Use the hang-up button to decrease speed and the pick-up button to increase it. Press each button multiple times in quick succession to adjust the speed.

Next, press the reset button 8 times to save your settings (confirmation via the hazard warning lights).

For best results, carry out this process at a constant speed, allowing you to monitor the changes and make precise adjustments as needed.

ACTIVATION & DEACTIVATION

Change modes via the smartphone app or press and hold the HOME button for 10 seconds

Repeat the process to switch from mode to mode

All distance percentages are approximate and not definitive, as they can be influenced by driving conditions such as city traffic, congestion, or motorway driving. Only after covering a longer distance of around 100 miles (or KM) will the actual percentage be accurately reflected.

Mode 1
10%-20% of the actual mileage is counted

The speedometer functions without any interference, and features like Lane Assist, Park Distance Control, and the reversing camera continue to operate as normal. However, the range and average consumption readings may not always be entirely accurate.

Mode 2
0 % - 2% of the actual mileage is counted

The speedometer operates without any issues, and while the average consumption and range may not be calculated correctly, the fuel level always remains accurate. The range is independent of the fuel level. The Lane Assist feature functions depending on your vehicle's equipment. To ensure all functions operate normally, simply switch off the device, and everything will work as expected. Other assistance systems remain unaffected.

Mode 3
100% of the actual mileage is counted

The module is deactivated and everything works as usual

The Aston Martin DBX Mileage Stopper tool automatically retains your last applied settings, so there’s no need to adjust them each time you start the car.

The device can be activated or deactivated at any time, whether the vehicle is in motion or stationary.

Warning

The Kilometer Stopper is only for testing and tuning purposes and should not be used on public roads. Unlike the speedometer calibration tools, our module is not intended for fraudulent purposes.

Additional information

Weight 100 g
Installation

Without Fitting, With Fitting

Reviews

There are no reviews yet.

Be the first to review “Aston Martin DBX Mileage Blocker 2023 – 2024”

Your email address will not be published. Required fields are marked *

Make Model Year
Aston Martin DBX 2023 - 2024

Related products

Service center
CUSTOMER CENTER

Here you will find all the details about our company

Shipping and return

Here you will find shipping and return related information

Technical Support

Here you will find information on all technical questions

Installation Support

Here you will find helpful information about installation

Call
Whatsapp
Telegram
Messenger
Support